Binance Download for PC

List of contents of this article:

• 1,Binance Download for PC What is the reason for the shock of the Pajero V73 engine?
• 2, The difference between Pajero v93 and v97
• 3. Mitsubishi Pajero V73 refueling and releasing the engine fault light is on in the morning. What's the matter?

What is the reason for the shock of the Pajero V73 engine?

1. The reason for the shock of the Pajero V73 engine is the failure of the gearbox rubber sleeve and rubber sleeve bracket, which can be solved by replacing it.

2. This is generally caused by the slippage of the belt; there will also be a sharp sound of dry friction of metal parts when the engine is running, which is generally the cause of damage to the bearings of generators, pumps and steering booster pumps; if it is the sound of engine running air leakage, it may be that the exhaust system is blocked, vacuum tube leakage or The result of fracture.

3. This may be caused by the strong carbon accumulation of the engine. The solution is: it is recommended to use detergent to clean the throttle valve and fuel injector, so that it can be improved. I hope my answer can help you, and I also wish you a smooth driving.

4. Usually, it should be exhaust.Pipe deformation, or guard plate deformation, because the engine moves back and forth relative to the car body when starting, accelerating and decelerating, the deformed exhaust pipe or guard plate interferes and collides with the car body or itself, causing the noise you mentioned, but one thing is certain, it is not a hard fault.

5. Hello, this situation is generally resonance. It is recommended to check the relevant buffer parts for the poster's reference.

The difference between Pajero v93 and v97

1, the difference between v93 and v97 is as follows: power. The Pajero v93 is equipped with the v60L version of the engine, with a maximum horsepower of 177 horsepower and a maximum torque of 265 N/m; the Pajero v97 is equipped with a v68L version of the engine, with a maximum power of 250 horsepower and a maximum torque of 330 N/m.

2. The v97 is equipped with a 0L V6 MIVEC engine, with a maximum output power of 222 horsepower. Obviously, the power performance of v97 is better than that of v93. Price range: Finally, it is worth mentioning that the price of v97 has also increased compared with v93.

3. The difference between Mitsubishi Pajero v93 and v97 1 The most important difference is of course the engine. You should know that although the v93 is very good, it has always been criticized for its lack of power. Compared with overtaking, the start is more meaty, but the v97 makes up for this problem very well. 2v93 is equipped with a 30LV6 engine. The maximum output power is 130 kW, Mitsubishi Pajero v97 and.

4. The main difference between Pajero v97 and v93 is that the engine displacement of the two is different. The engine of v97 has a displacement of 8 liters, and the engine of V93 has a displacement of 0 liters.In addition, the Pajero v97 has two differential locks, which will have stronger cross-country ability, while the Pajero v93 only has one differential lock.

5. The difference between Pajero V93 and V97 is mainly in displacement. V93 is 0L, while V97 is 8L displacement.

The engine fault light of Mitsubishi Pajero V73 is on in the morning. What's the matter?

1. The fault light of the Pajero engine may be caused by the following reasons: poor quality of gasoline will lead to incomplete combustion of the mixed gas in the cylinder, causing the fault light to turn on, and it will be easy to produce carbon accumulation. The carbon accumulation at the top of the air intake and the piston will lead to poor atomization, resulting in insufficient combustion, so that the fault light turns on at startup.

2. [Pacific Automobile Network] Reasons why the engine fault light turns on after releasing oil from the car: poor quality of gasoline (such as too much impurities, high glue content, high sulfur content); oxygen sensor failure; air flow sensor failure; spark plug carbonization; engine explosion; water temperature sensor damage.

3. v73 idle anti-slip light on, engine fault light on, moveIf the power is insufficient, the speed will increase. If you stop the fire and then start the anti-skid light, you can drive normally, but the engine fault light is always on, and the engine fault light has not been extinguished for normal driving. This phenomenon occurs several times. It is to go to the car repair and use the detector to eliminate the fault code. Please tell me what the problem is.

4. If there is a problem with the air intake system, there will be poor combustion, and the engine fault light will turn on.